Loughborough University
Browse
Thesis-2011-BenNaser.pdf (3.43 MB)

Measurement of range of motion of human finger joints, using a computer vision system

Download (3.43 MB)
thesis
posted on 2013-06-18, 10:54 authored by Abdusalam Ben-Naser
Assessment of finger range of motion (ROM) is often required for monitoring the effectiveness of rehabilitative treatments and for evaluating patients' functional impairment. There are several devices which are used to measure this motion, such as wire tracing, tracing onto paper and mechanical and electronic goniometry. These devices are quite cheap, excluding electronic goniometry; however the drawbacks of these devices are their lack of accuracy and the time- consuming nature of the measurement process. The work described in this thesis considers the design, implementation and validation of a new medical measurement system utilized in the evaluation of the range of motion of the human finger joints instead of the current measurement tools. The proposed system is a non-contact measurement device based on computer vision technology and has many advantages over the existing measurement devices. In terms of accuracy, better results are achieved by this system, it can be operated by semi-skilled person, and is time saving for the evaluator. The computer vision system in this study consists of CCD cameras to capture the images, a frame-grabber to change the analogue signal from the cameras to digital signals which can be manipulated by a computer, Ultra Violet light (UV) to illuminate the measurement space, software to process the images and perform the required computation, a darkened enclosure to accommodate the cameras and UV light and to shield the working area from any undesirable ambient light. Two calibration techniques were used to calibrate the cameras, Direct Linear Transformation and Tsai. A calibration piece that suits this application was designed and manufactured. A steel hand model was used to measure the fingers joint angles. The average error from measuring the finger angles using this system was around 1 degree compared with 5 degrees for the existing used techniques.

History

School

  • Mechanical, Electrical and Manufacturing Engineering

Publisher

© Abdusalam Ben-Naser

Publication date

2011

Notes

A Doctoral Thesis. Submitted in partial fulfilment of the requirements for the award of Doctor of Philosophy of Loughborough University.

EThOS Persistent ID

uk.bl.ethos.587885

Language

  • en