Loughborough University
Browse
Thesis-2014-Hannah.pdf (17.89 MB)

Improving the validity of shod human footstrike modelling with dynamic loading conditions determined from biomechanical motion capture trials

Download (17.89 MB)
thesis
posted on 2014-06-18, 13:33 authored by Iain Hannah
This thesis presents and evaluates a number of finite element footstrike models developed to allow the performance of prospective athletic footwear designs to be evaluated in a virtual environment. Successful implementation of such models would reduce the industry’s traditional reliance on physical prototyping and therefore reduce the time and associated costs required to develop a product. All boundary conditions defined in each of the footstrike models reported were directly determined from biomechanical motion capture trials to ensure that the loading applied was representative of shod human running. Similarly, the results obtained with each model were compared to digitised high speed video footage of experimental trials and validated against biomechanical measures such as foot segment kinematics, ground reaction force and centre of pressure location. A simple model loaded with triaxial force profiles determined from the analysis of plantar pressure data was found to be capable of applying highly representative load magnitudes but the distribution of applied loading was found to be less accurate. Greater success at emulating the deformation that occurs in the footwear during an entire running footstrike was achieved with models employing kinematic foot segment boundary conditions although this approach was found to be highly sensitive to the initial orientation of the foot and footwear components, thus limiting the predictive capacity of such a methodology. A subsequent model was therefore developed to utilise exclusively kinetic load conditions determined from an inverse dynamic analysis of an experimental trial and demonstrated the greatest predictive capacity of all reported models. This was because the kinematics of the foot were allowed to adapt to the footwear conditions defined in the analysis with this approach. Finally, the reported finite element footstrike models were integrated with automated product optimisation techniques. A topology optimisation approach was first utilised to generate lightweight midsole components optimised for subject‐specific loading conditions whilst a similar shape optimisation methodology was subsequently used to refine the geometry of a novel footwear design in order to minimise the peak material strains predicted.

Funding

Adidas AG.

History

School

  • Mechanical, Electrical and Manufacturing Engineering

Publisher

© Iain Hannah

Publication date

2014

Notes

This is a redacted version of the Thesis: for more information please contact the author. A Doctoral Thesis. Submitted in partial fulfilment of the requirements for the award of Doctor of Philosophy of Loughborough University.

Language

  • en

Usage metrics

    Mechanical, Electrical and Manufacturing Engineering Theses

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC