The Use of Rapid Prototyping in the Design of a Customized Ankle Brace Structure for ACL Injury Risk Reduction.pdf (1.28 MB)
The use of rapid prototyping in the design of a customised ankle brace structure for ACL injury risk reduction.
journal contribution
posted on 2014-09-18, 13:46 authored by Phillip S.P. Teng, K.F. Leong, Pui W. Kong, Ben Halkon, P.Y. HuangRapid prototyping, or additive manufacturing, is becoming more useful in creating functional prototypes, especially when customisation is required. This paper explores the use of three-dimensional (3D) printing in designing a customised ankle brace structure for anterior cruciate ligament (ACL) injury risk reduction. A new process is proposed to obtain ankle flexion angles and the corresponding foot surface strain associated with high ACL injury risks through motion analysis. This data is used in the design of the customised ankle brace structure and printed using rapid prototyping. One customised ankle brace structure was printed and tested to demonstrate this proposed framework. The ankle flexion range of motion (ROM) was significantly reduced in the high-risk ankle positions with the ankle brace structure. Rapid prototyping could thus be used to design customised ankle brace structures and this is useful in reducing fabrication time and complexity of customisation. © 2013 Taylor & Francis.
History
School
- Mechanical, Electrical and Manufacturing Engineering
Published in
Virtual and Physical PrototypingVolume
8Issue
4Pages
241 - 247Citation
TENG, P.S.P. ... et al, 2013. The use of rapid prototyping in the design of a customised ankle brace structure for ACL injury risk reduction. Virtual and Physical Prototyping, 8 (4), pp. 241 - 247Publisher
© Taylor and FrancisVersion
- AM (Accepted Manuscript)
Publisher statement
This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/Publication date
2013Notes
This article is an Accepted Manuscript of an article published by Taylor & Francis Group in Virtual and Physical Prototyping on 11th December 2013, available online at: http://www.tandfonline.com/10.1080/17452759.2013.863533ISSN
1745-2759eISSN
1745-2767Publisher version
Language
- en