Loughborough University
Browse
IJSSD_Submission3.pdf (2.53 MB)

Modelling infinite length panels using the finite element method

Download (2.53 MB)
journal contribution
posted on 2016-06-24, 15:04 authored by Patrick Fenner, Andrew WatsonAndrew Watson, C.A. Featherston
This paper compares three finite element models for determining the buckling and post-buckling performance of infinite length thin walled composite and metal stiffened panels — such as for modeling theoretical aircraft upper wing skin panels — namely single bay, double half-bay and quad half-bay models. The quad half-bay model is shown to be the ideal model as all wavelengths of buckling are permitted. This model gives an accurate estimate of postbuckling behavior that can include advanced behavior such as mode jumping or collapse while the single bay and double half-bay models are more restrictive and do not allow for accurate mode jumping to take place. Sample panels are analyzed for buckling performance using the computer program VICONOPT, which assumes an infinite length structure based on exact strip theory. This analysis is then compared to results from the quad half-bay FEM model, using the Abaqus solver, where the two models are in good agreement for the initial buckling performance for both the metal and composite panels. Buckling prediction for the quad half-bay model is within 0.5% 0.5% for the critical buckling mode, and within 3% 3% of all compared modes; and postbuckling performance compares well with the results of previous investigation of the same sample panel geometry.

Funding

This work is funded with the help of the Engineering and Physical Sciences Research Council and Airbus UK.

History

School

  • Aeronautical, Automotive, Chemical and Materials Engineering

Department

  • Aeronautical and Automotive Engineering

Published in

International Journal of Structural Stability and Dynamics

Citation

FENNER, P., WATSON, A. and FEATHERSTON, C.A., 2016. Modelling infinite length panels using the finite element method. International Journal of Structural Stability and Dynamics, 16 (7), 1750038.

Publisher

© World Scientific Publishing

Version

  • AM (Accepted Manuscript)

Publisher statement

This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/

Acceptance date

2016-04-20

Publication date

2016

Notes

Electronic version of an article published as International Journal of Structural Stability and Dynamics, 16 (7), 1750038. © World Scientific Publishing Company. http://dx.doi.org/10.1142/S0219455417500389

ISSN

1793-6764

Language

  • en