AIAA-JUN2013.pdf (8.86 MB)
LES of high speed jet flow from convergent-divergent rectangular S-bend ducts using synthetic inlet conditions
The effect of upstream duct curvature on the exhaust plume of a jet engine is further studied. Using synthetically created turbulence, improvements are made to the flow through out the S-bend validation case previously studied. The effect of a contracting 70° S-bend duct on the over-expanded exhaust plume emanating from a rectangular nozzle of aspect ratio 5.8:1 at a nozzle pressure ratio of 2.5 and Reynolds number of 7.61×105 is then studied. A modified version of the synthetic eddy method for creating artificial turbulence is initially validated. The validation of the Hydra CFD code is then expanded upon for an S-bend duct including both RANS and LES methodologies. For the combined S-bend and nozzle cases the total pressure gradients that were previously observed at the nozzle exit plane for k-ε RANS are also similarly observed using LES with synthetically created in flow turbulence thus confirming the existence of such features. The calculations were carried out using an unstructured, median-dual CFD solver with predominantly hexahedral elements containing approximately 175 million nodes.
Funding
This work is supported by the EPSRC and Rolls Royce.
History
School
- Aeronautical, Automotive, Chemical and Materials Engineering
Department
- Aeronautical and Automotive Engineering
Published in
21st AIAA Computational Fluid Dynamics ConferenceCitation
COATES, T. and PAGE, G.J., 2013. LES of high speed jet flow from convergent-divergent rectangular S-bend ducts using synthetic inlet conditions. IN: Proceedings of the 21st AIAA Computational Fluid Dynamics Conference, San Diego, CA, 24-27th June, (AIAA 2013-2843).Publisher
AIAA / © The AuthorsVersion
- AM (Accepted Manuscript)
Publisher statement
This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/Publication date
2013Notes
This conference paper was accepted for publication by AIAA and the definitive version is available at: http://dx.doi.org/10.2514/6.2013-2843Publisher version
Language
- en