Loughborough University
Browse
RDPM Conference Paper_Yue_Lu_reviewed.pdf (495.55 kB)

Fabrication of the continuous carbon fiber reinforced plastic composites by additive manufacturing

Download (495.55 kB)
conference contribution
posted on 2019-04-17, 10:00 authored by Yue Lu, Gin Kit Poh, Andrew Gleadall, Liguo Zhao, Xiaoxiao Han
Additive manufacturing has been adopted in a wide range of industry. However, limited mechanical properties have prevented additive manufacturing from further development in high value applications. Carbon-fibre-reinforced composites are widely used in automobile and aerospace industries due to their improved mechanical properties and reduced weight. The introduction of carbon fibre into additive manufacturing will allow its application across a broader industrial field. In this paper, carbon-fibre-reinforced composite samples were produced by material extrusion and stereolithography. Tensile tests were performed on pure polymer and carbon-fibre-reinforced samples. Experimental results were compared to theoretical ones based on a rule of mixture. Samples produced by material extrusion showed a 73.3 % reduction in elastic modulus compared with theoretical values whereas those produced by stereolithography showed a 42.06% reduction. Micrographs showed that stereolithography samples had better bonding between the matrix and the fibre.

History

School

  • Mechanical, Electrical and Manufacturing Engineering

Published in

16th Conference on Rapid Design, Prototyping & Manufacturing (RDPM2019)

Citation

LU, Y. ... et al, 2019. Fabrication of the continuous carbon fiber reinforced plastic composites by additive manufacturing. Presented at the 16th Conference on Rapid Design, Prototyping & Manufacturing (RDPM2019), Brunel University London, Uxbridge, UK, 4-5 April 2019.

Version

  • AM (Accepted Manuscript)

Publisher statement

This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/

Acceptance date

2019-04-15

Publication date

2019

Notes

This is a conference paper.

Language

  • en

Location

Brunel University London, Uxbridge