MPhilThesis-1980-Bishop.pdf (3.85 MB)
Ion assisted evaporation of thin films
thesis
posted on 2012-12-17, 11:11 authored by Charles A. BishopRadio frequency ion-plating was used to deposit thin films onto polyester
substrates at room temperature. The radio frequency plasma produced
a substrate bias that was seen to affect the structure of the films by
altering their nucleation and growth.
Ion-plating essentially refers to a process whereby the substrate, or
the depositing atoms, or both, are subjected to the influence of a region
of high energy particles, the region in this case being a radio frequency
glow discharge formed in an argon atmosphere.
Ion-plating is usually associated with the deposition of metals onto
metallic substrates; here it was used to aid the deposition of several
materials (oxides as well as metals) onto non-conducting substrates.
Improved adhesion of metal films onto metallic substrates can normally be
obtained by heating the substrate. The polyester substrates used could not
be heated and ion-plating was investigated as an alternative method of
providing similarly well adhered films. It was thought that the ion and
neutral bombardment of the substrate would provide an active surface favouring
good adhesion. This should also provide the depositing material with
the increase in surface mobility associated with the heating of the substrates.
Optical and electron microscopes were used to examine the surface of the
plasma etched polyester. The evidence produced showed that the etching
resulted in no identifiable physical damage to the surface and suggested
that the improved adhesion was attributed to a chemical change...
History
School
- Science
Department
- Physics
Publisher
© Charles A. BishopPublication date
1980Notes
A Master's Thesis submitted in partial fulfilment of the requirements for the award of Master of Philosophy of the Loughborough University of Technology.Language
- en