Occupancy driven supervisory control of indoor environment systems to minimise energy consumption of airport terminal building

A very economical way of reducing the operational energy consumed by large commercial buildings such as an airport terminal is the automatic control of its active energy systems. Such control can adjust the indoor environment systems setpoints to satisfy comfort during occupancy or when unoccupied, initiate energy conservation setpoints and if necessary, shut down part of the building systems. Adjusting energy control setpoints manually in large commercial buildings can be a nightmare for facility managers. Incidentally for such buildings, occupancy based control strategies are not achieved through the use of conventional controllers alone. This research, therefore, investigated the potential of using a high-level control system in airport terminal building. The study presents the evolution of a novel fuzzy rule-based supervisory controller, which intelligently establishes comfort setpoints based on flow of passenger through the airport as well as variable external environmental conditions. The inputs to the supervisory controller include: the time schedule of the arriving and departing passenger planes; the expected number of passengers; zone daylight illuminance levels; and external temperature. The outputs from the supervisory controller are the low-level controllers internal setpoint profile for thermal comfort, visual comfort and indoor air quality. Specifically, this thesis makes contribution to knowledge in the following ways: It utilised artificial intelligence to develop a novel fuzzy rule-based, energy-saving supervisory controller that is able to establish acceptable indoor environmental quality for airport terminals based on occupancy schedules and ambient conditions. It presents a unique methodology of designing a supervisory controller using expert knowledge of an airport s indoor environment systems through MATLAB/Simulink platform with the controller s performance evaluated in both MATLAB and EnergyPlus simulation engine. Using energy conservation strategies (setbacks and switch-offs), the pro-posed supervisory control system was shown to be capable of reducing the energy consumed in the Manchester Airport terminal building by up to 40-50% in winter and by 21-27% in summer. It demonstrates that if a 45 minutes passenger processing time is aimed for instead of the 60 minutes standard time suggested by ICAO, energy consumption is significantly reduced (with less carbon emission) in winter particularly. The potential of the fuzzy rule-based supervisory controller to optimise comfort with minimal energy based on variation in occupancy and external conditions was demonstrated through this research. The systematic approach adopted, including the use of artificial intelligence to design supervisory controllers, can be extended to other large buildings which have variable but predictable occupancy patterns.