17.08.17 - The Design and Assessment of Bio-Inspired Additive Manufactured Stab Resistant Armour.pdf (933.66 kB)
The design and assessment of bio-inspired additive manufactured stab-resistant armour
journal contribution
posted on 2017-08-25, 12:53 authored by Andrew JohnsonAndrew Johnson, Guy Bingham, Candice E. MajewskiThe performance of modern fibre-based or Polycarbonate armour has significantly progressed since their introduction, providing protection against a range of low and high velocity threats. While this is so, users of such armour frequently report of issues relating to their operational suitability resulting in impaired performance and physiological effects. Recently researchers have focussed on how naturally occurring protective mechanisms could be utilised to enhance the protective and operational performance of wearers of engineered body armour. The research presented within this paper therefore utilises a series of key design characteristics exhibited within naturally occurring elasmoid scale armour, coupled with established Laser Sintering manufacturing parameters, for the realisation and assessment of a scale-based stab resistant armoured structure to internationally recognised test standards.
History
School
- Design and Creative Arts
Department
- Design
Published in
Virtual and Physical PrototypingVolume
13Issue
2Pages
49-57Citation
JOHNSON, A., BINGHAM, G.A. and MAJEWKSI, C.E., 2017. The design and assessment of bio-inspired additive manufactured stab-resistant armour. Virtual and Physical Prototyping, 13 (2), pp.49-57.Publisher
© Taylor & FrancisVersion
- AM (Accepted Manuscript)
Publisher statement
This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/Acceptance date
2017-08-16Publication date
2017-08-28Copyright date
2018Notes
This is an Accepted Manuscript of an article published by Taylor & Francis in Virtual and Physical Prototyping on 28 August 2017, available online: http://www.tandfonline.com/10.1080/17452759.2017.1369438.ISSN
1745-2759eISSN
1745-2767Publisher version
Language
- en