Loughborough University
Browse
Martin_Fabiani_LIPSS_GISAXS__FINAL.pdf (1.78 MB)

Mapping the structural order of laser-induced periodic surface structures in thin polymer films by microfocus beam grazing incidence small-angle x-ray scattering

Download (1.78 MB)
journal contribution
posted on 2017-09-27, 10:13 authored by Ignacio Martin-Fabiani, Esther Rebollar, Mari-Cruz Garcia-Gutierrez, Daniel R. Rueda, Marta Castillejo, Tiberio A. Ezquerra
In this work we present an accurate mapping of the structural order of laser-induced periodic surface structures (LIPSS) in spin-coated thin polymer films, via a microfocus beam grazing incidence small-angle X-ray scattering (μGISAXS) scan, GISAXS modeling, and atomic force microscopy imaging all along the scanned area. This combined study has allowed the evaluation of the effects on LIPSS formation due to nonhomogeneous spatial distribution of the laser pulse energy, mapping with micrometric resolution the evolution of the period and degree of structural order of LIPSS across the laser beam diameter in a direction perpendicular to the polarization vector. The experiments presented go one step further toward controlling nanostructure formation in LIPSS through a deep understanding of the parameters that influence this process.

Funding

The authors acknowledge financial support from MINECO (Grant Nos. MAT2009-07789, CTQ2010-15680, CTQ2013- 43086, MAT2011-23455, MAT2012-33517, FPI BES-2010- 030074, and Ramon y Cajal Contract No. RYC-2011-08069). ́ The assistance of S. Roth at PO3 (PETRA III) is greatly acknowledged.

History

School

  • Aeronautical, Automotive, Chemical and Materials Engineering

Department

  • Materials

Published in

ACS Applied Materials and Interfaces

Volume

7

Issue

5

Pages

3162 - 3169

Citation

MARTIN-FABIANI, I. ... et al., 2015. Mapping the structural order of laser-induced periodic surface structures in thin polymer films by microfocus beam grazing incidence small-angle x-ray scattering. ACS Applied Materials and Interfaces, 7 (5), pp. 3162 - 3169.

Publisher

© American Chemical Society

Version

  • AM (Accepted Manuscript)

Publisher statement

This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/

Acceptance date

2015-01-21

Publication date

2015

Notes

This article was published in the journal ACS Applied Materials and Interfaces [© American Chemical Society] and the definitive version is available at: https://doi.org/10.1021/am5074968

ISSN

1944-8244

eISSN

1944-8252

Language

  • en