Stellenbosch2011.pdf (371.51 kB)
A low-profile cavity-backed slot antenna loaded with an AMC reflector
conference contribution
posted on 2012-06-26, 15:30 authored by J. Joubert, J.C. Vardaxoglou, William WhittowWilliam Whittow, J.W. OdendaalA low profile printed slot antenna is presented with uni-directional radiation properties. The slot
antenna radiates above a closely spaced artificial magnetic conducting (AMC) reflector. The electromagnetic
band gap (EBG) performance was evaluated with an equivalent waveguide feed in place of one half-wavelength
section of the slot antenna. Experimental results for the final antenna design (with a size of 1.02 0 × 0.82 0 ×
0.063 0), mounted on 1.5 0 × 1.5 0 back plate, exhibit a 5% impedance bandwidth, maximum gain in excess of
10 dBi, low cross-polarization, and a front-to-back ratio of approximately 25 dB.
History
School
- Mechanical, Electrical and Manufacturing Engineering
Citation
JOUBERT, J. ... et al, 2011. A low-profile cavity-backed slot antenna loaded with an AMC reflector. South African AP MTT IEEE Conference, Cape Town, South Africa, 14th-15th April.Publisher
© IEEEVersion
- AM (Accepted Manuscript)
Publication date
2011Notes
© 2011 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Language
- en