Loughborough University
Leicestershire, UK
LE11 3TU
+44 (0)1509 263171
Loughborough University

Loughborough University Institutional Repository

Please use this identifier to cite or link to this item: https://dspace.lboro.ac.uk/2134/10189

Title: Effect of emulsifier type on droplet disruption in repeated Shirasu porous glass membrane homogenization
Authors: Vladisavljevic, Goran T.
Surh, Jeonghee
McClements, D. Julian
Issue Date: 2006
Publisher: © American Chemical Society
Citation: VLADISAVLJEVIC, G.T., SURH, J. and MCCLEMENTS, D.J., 2006. Effect of emulsifier type on droplet disruption in repeated Shirasu porous glass membrane homogenization. Langmuir, 22 (10), pp. 4526-4533.
Abstract: The influence of various emulsifier types (anionic, nonionic, and zwitterionic) on the mean particle size, transmembrane flux, and membrane fouling in repeated membrane homogenization using a Shirasu porous glass (SPG) membrane has been investigated. Oil-in-water (O/W) emulsions (40 wt % corn oil stabilized by 0.06−2 wt % sodium dodecyl sulfate (SDS) or 0.1−2 wt % Tween 20 at pH 3 or 0.5−2 wt % β-lactoglobulin (β-Lg) at pH 7) were prepared by passing coarsely emulsified feed mixtures five times through the membrane with a mean pore size of 8.0 μm under the transmembrane pressure of 100 kPa. The flux increased as the number of passes increased, tending to a maximum limiting value. The maximum flux for the Tween 20-stabilized emulsions (5−47 m3·m-2·h-1) was smaller than that for the SDS-stabilized emulsions (29−60 m3·m-2·h-1) because less energy was needed for the disruption of a SDS-stabilized droplet due to the lower interfacial tension. The mean particle size after five passes was 4.1−6.8 and 6.4−8.7 μm for 0.1−2 wt % SDS and Tween 20, respectively. The flux in the presence of β-Lg was much smaller than that in the presence of SDS and Tween 20, which was a consequence of more pronounced membrane fouling, due to the protein adsorption to the membrane surface. After five passes through the membrane, the fouling resistance in the presence of 2 wt % β-Lg (1.1 × 1010 1/m) was 2 orders of magnitude higher than that for 0.5 wt % Tween 20 and an order of magnitude higher than the membrane resistance. If a clean membrane was used in the fifth pass, a 2-fold reduction of the fouling resistance was observed.
Description: This article was published in the journal, Langmuir: http://pubs.acs.org/journal/langd5
Version: Closed Access
DOI: 10.1021/la053410f
URI: https://dspace.lboro.ac.uk/2134/10189
Publisher Link: http://dx.doi.org/10.1021/la053410f
ISSN: 0743-7463
Appears in Collections:Closed Access (Chemical Engineering)

Files associated with this item:

File Description SizeFormat
Effect of emulsifier type on droplet disruption in repeated SPG membrane homogenization.pdf637.13 kBAdobe PDFView/Open


SFX Query

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.