Loughborough University
Leicestershire, UK
LE11 3TU
+44 (0)1509 263171
Loughborough University

Loughborough University Institutional Repository

Please use this identifier to cite or link to this item: https://dspace.lboro.ac.uk/2134/10553

Title: Production of multiple emulsions for drug delivery systems by repeated SPG membrane homogenization: Influence of mean pore size, interfacial tension and continuous phase viscosity
Authors: Vladisavljevic, Goran T.
Shimizu, Masataka
Nakashima, Tadao
Keywords: Membrane emulsification
Shirasu Porous Glass membrane
Multiple emulsion
Premix membrane emulsification
Drug delivery system
Issue Date: 2006
Publisher: © Elsevier
Citation: VLADISAVLJEVIC, G.T., SHIMIZU, M. and NAKASHIMA, T., 2006. Production of multiple emulsions for drug delivery systems by repeated SPG membrane homogenization: Influence of mean pore size, interfacial tension and continuous phase viscosity. Journal of Membrane Science, 284 (1-2), pp. 373-383.
Abstract: Multiple water-in-oil-in-water (W/O/W) emulsions for drug delivery systems were produced by extruding a coarse W/O/W emulsion 5 times under pressure of 70-150 kPa through Shirasu Porous Glass (SPG) membrane with a mean pore size of 5.4, 7.6, 10.7, 14.8, and 20.3 μm. The encapsulation efficiency of a marker (CaNa2-EDTA) determined by Inductively Coupled Plasma (ICP) emission spectrophotometer was 83-85 % in the emulsion products containing 30 vol% of inner droplets and 30-50 vol% of outer drops. The ratio of mean particle size to the mean pore size after five extrusions decreased from 1.25 to 0.68 as the pore size increased from 5.4 to 20.3 μm at the wall shear stress of continuous phase in the pores of 200 Pa. The mean particle size of the resultant droplets decreased with increasing the continuous phase viscosity and with decreasing the pore size. The ratio of mean particle size to the mean pore size for the same multiple emulsions prepared by direct extrusion of W/O emulsions through SPG membrane into stirring continuous phase was 3.46 and was independent on the pore size. At low continuous phase viscosity, uniform droplets with a span values of 0.28- 0.34 were produced at very high transmembrane fluxes exceeding 200 m3m-2h-1.
Description: This is the author’s version of a work that was accepted for publication in Journal of Membrane Science. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published at: http://dx.doi.org/10.1016/j.memsci.2006.08.003
Version: Accepted for publication
DOI: 10.1016/j.memsci.2006.08.003
URI: https://dspace.lboro.ac.uk/2134/10553
Publisher Link: http://dx.doi.org/10.1016/j.memsci.2006.08.003
http://www.journals.elsevier.com/journal-of-membrane-science/
ISSN: 0376-7388
Appears in Collections:Published Articles (Chemical Engineering)

Files associated with this item:

File Description SizeFormat
Manuscript.pdf716.41 kBAdobe PDFView/Open

 

SFX Query

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.