Loughborough University
Leicestershire, UK
LE11 3TU
+44 (0)1509 263171
Loughborough University

Loughborough University Institutional Repository

Please use this identifier to cite or link to this item: https://dspace.lboro.ac.uk/2134/12168

Title: The laser torquemeter and implications of speckle decorrelation on torque measurement.
Authors: Tullis, Iain D.C.
Issue Date: 2000
Publisher: © Iain David Charles Tullis
Abstract: Torque measurement of a rotating shaft is a method of monitoring machine performance. Steady transmission of mechanical power from the prime mover to the load is vital to avoid gear and bearing wear, shaft fatigue failure, bearing and coupling failure and noise. Mean and fluctuating torque are fundamental quantities of interest. The laser torquemeter is capable of providing a non-contact measurement of time-resolved torque through a driven system. The laser torquemeter depends upon laser speckle produced from coherent light illuminating a diffuse object and the speckle pattern may be used in determining the angular position of a rotating object. When the object rotates the backscattered speckle pattern, which changes continuously but repeats exactly with every revolution, is sampled by a suitably positioned photo detector. The photo detector output signal is periodic and one period is recorded in memory as a reference and the angular position of a shaft can then be determined by a comparison of this recorded reference signal with the current photo detector output signal. The speckle pattern from two axially separated points on the shaft are monitored and under low or, ideally, zero torque the photo detector outputs are recorded into the laser torquemeter electronics. The laser torquemeter then tracks the live photo detector output and determines the angle at the two points on the shaft. Relative angular displacement in the two angle outputs appears when torque is applied and the shaft twists. When the shaft is displaced, for example by vibration, the backscattered speckle pattern changes on the photo detector and the similarity between the recorded, reference signal and the live, current signal is reduced. In this thesis, the cross-correlation of the real-time photodetector output signal and the recorded reference signal as a function of shaft position is examined. The effects of various shaft motions - rotation, axial translation, pitch and yaw, and radial translation are theoretically and experimentally examined and the results can then be used in the design of an optical head for the laser torquemeter. A review of the current torquemeter technology allows for discussion of the broad spectrum of typical torquemeter operating conditions. The optical head of the laser torquemeter may vary significantly for various torque measurement scenarios. A design procedure for the optical head of the laser torquemeter is summarised. The holy grail of torquemeter manufacturers is to produce a cheap, easy to use, robust, accurate, reliable and non-contacting torquemeter. The laser torque meter has great potential to meet these requirements.
Description: A Doctoral Thesis. Submitted in partial fulfilment of the requirements for the award of Doctor of Philosophy of Loughborough University.
URI: https://dspace.lboro.ac.uk/2134/12168
Appears in Collections:PhD Theses (Mechanical, Electrical and Manufacturing Engineering)

Files associated with this item:

File Description SizeFormat
Thesis-2000-Tullis.pdf5.36 MBAdobe PDFView/Open
Form-2000-Tullis.pdf53.22 kBAdobe PDFView/Open


SFX Query

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.