Loughborough University
Leicestershire, UK
LE11 3TU
+44 (0)1509 263171
Loughborough University

Loughborough University Institutional Repository

Please use this identifier to cite or link to this item: https://dspace.lboro.ac.uk/2134/12740

Title: Extraordinary magnetoresistance: sensing the future
Authors: Hewett, Thomas H.
Kusmartsev, F.V.
Keywords: Extraordinary magnetoresistance
Interface resistance
Issue Date: 2012
Publisher: Springer Verlag © Versita sp. z o. o.
Citation: HEWETT, T.H. and KUSMARTSEV, F.V., 2012. Extraordinary magnetoresistance: sensing the future. Central European Journal of Physics, 10 (3), pp. 1 - 7
Abstract: Simulations utilising the finite element method (FEM) have been produced in order to investigate aspects of circular extraordinary magnetoresistance (EMR) devices. The effect of three specific features on the resultant magnetoresistance were investigated: the ratio of the metallic to semiconducting conductivities ( M/ S); the semiconductor mobility; and the introduction of an intermediate region at the semiconductormetal interface in order to simulate a contact resistance. In order to obtain a large EMR effect the conductivity ratio ( M/ S) is required to be larger than two orders of magnitude; below this critical value the resultant magnetoresistance effect is dramatically reduced. Large mobility semiconductors exhibit larger EMR values for a given field (below saturation) and reduce the magnetic field required to produce saturation of the magnetoresistance. This is due to a larger Hall angle produced at a given magnetic field and is consistent with the mechanism of the EMR effect. Since practical magnetic field sensors are required to operate at low magnetic fields, high mobility semiconductors are required in the production of more sensitive EMR sensors. The formation of a Schottky barrier at the semiconductor-metal interface has been modelled with the introduction of a contact resistance at the semiconductor-metal interface. Increasing values of contact resistance are found to reduce the EMR effect with it disappearing altogether for large values. This has been shown explicitly by looking at the current flow in the system and is consistent with the mechanism of the EMR effect. The interface resistance was used to fit the simulated model to existing experimental data. The best fit occurred with an interface with resistivity of 1.55×10−4 m (overestimate). The EMR effect holds great potential with regard to its future application to magnetic field sensors. The design of any such devices should incorporate high mobility materials (such as graphene) along with the specific features presented in this paper in order to produce effective magnetic field sensors.
Description: This article is closed access, it was published in the serial Central European Journal of Physics [Springer Verlag © Versita sp. z o. o.]. The definitive version is available at: http://dx.doi.org/10.2478/s11534-012-0015-1
Version: Published
DOI: 10.2478/s11534-012-0015-1
URI: https://dspace.lboro.ac.uk/2134/12740
Publisher Link: http://link.springer.com/content/pdf/10.2478%2Fs11534-012-0015-1.pdf
ISSN: 1895-1082
Appears in Collections:Closed Access (Physics)

Files associated with this item:

File Description SizeFormat
10.2478_s11534-012-0015-1.pdf2.06 MBAdobe PDFView/Open


SFX Query

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.