Loughborough University
Leicestershire, UK
LE11 3TU
+44 (0)1509 263171
Loughborough University

Loughborough University Institutional Repository

Please use this identifier to cite or link to this item: https://dspace.lboro.ac.uk/2134/13716

Title: The characterisation of a thin film UV contactor and its application to the treatment of contaminated cutting oils
Authors: Peppiatt, Christopher J.
Issue Date: 1997
Publisher: © Christopher James Peppiatt
Abstract: The characteristics and applications of a novel design of a thin film photocontactor based on the principle of irradiating a 'water bell' with ultraviolet (UV) light a,e considered in this work. Measurements of UV doses received by the liquid films in single passes were made using both actinometric and bioassay-based methods. The chemical actinometer employed was potassium ferrioxalate (K,Fe(C,o.l,) and the microorganisms used in the bioassay were Pseudomonas stutzeri (mRG) and a repair-deficient strain of Escherichia coli (NCIMB 11190). Good agreement was obtained between the doses measured using actinometry and the E. coli-based bioassay. At higher doses, good agreement was also obtained for the dose estimates made using actinometry and the Ps. stutzeri bioassay. In addition, a hydrodynamic water bell model, previously developed in the literature, was combined with a UV intensity model to predict UV doses with generally good results. Microbially contaminated metal working fluids were identified as a suitable medium for disinfection using the thin film contactor because they are not treatable using conventional UV contactors, and because the systems employed in industry vary widely in scale. Batches of contaminated emulsion ranging in volume from 200 to 1000 L were successfully disinfected. Representative members of the microbial population were isolated, and their changing status throughout treatment recorded. Against expectations, the population showed no capacity for the post-irradiation repair of UV-induced damage. A simplified disinfection model was established in order to model the treatment of batches of contaminated metal working fluids. Preliminary predictions made using a combination of experimental data for the population as a whole and that for individual species coupled with that generated using the hydrodynamic bell model, gave encouraging results.
Description: A Doctoral Thesis. Submitted in partial fulfilment of the requirements for the award of Doctor of Philosophy of Loughborough University.
Sponsor: Engineering and Physical Sciences Research Council; Midlands Electricity Board; Houghton-Vaughan
URI: https://dspace.lboro.ac.uk/2134/13716
Appears in Collections:PhD Theses (Chemical Engineering)

Files associated with this item:

File Description SizeFormat
Thesis-1997-Peppiatt.pdf5.06 MBAdobe PDFView/Open
Form-1997-Peppiatt.pdf50.79 kBAdobe PDFView/Open


SFX Query

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.