Loughborough University
Leicestershire, UK
LE11 3TU
+44 (0)1509 263171
Loughborough University

Loughborough University Institutional Repository

Please use this identifier to cite or link to this item: https://dspace.lboro.ac.uk/2134/14039

Title: Analysis of a free machining α+β titanium alloy using conventional and ultrasonically assisted turning
Authors: Muhammad, Riaz
Hussain, Mohammad Sajid
Maurotto, Agostino
Siemers, Carsten
Roy, Anish
Silberschmidt, Vadim V.
Keywords: Machinability
Free-machining alloy
Ultrasonically assisted turning
Titanium alloy
Chip formation process
Issue Date: 2014
Publisher: © Elsevier
Citation: MUHAMMAD, M. ... et al, 2014. Analysis of a free machining α+β titanium alloy using conventional and ultrasonically assisted turning. Journal of Materials Processing Technology, 241 (4), pp.906-915.
Abstract: Rapid advancements in power generation and aviation industries have witnessed a widespread use of titanium and its alloys in many applications. This is primarily due to their excellent mechanical properties including, amongst other, high strength-to-density ratio, outstanding fatigue properties and corrosion resistance with the ability to withstand moderately high temperatures. However, this combination of properties results in poor machinability of the material, increasing the cost of components machined with conventional cutting techniques. Recently, Ti 6Al 2Sn 4Zr 6Mo, a modern titanium alloy with improved mechanical properties, has been introduced as a possible replacement of Ti 6Al 4V in aerospace industry. However, its poor machinability and formation of long chips in conventional turning are main limitations for its wide-spread application. Therefore, a new alloy based on Ti 6Al 2Sn 4Zr 6Mo, namely Ti 6Al 7Zr 6Mo 0.9La, was developed; it shows enhanced machinability generating short chips during metal cutting, which prevents entanglement with cutting tools improving productivity. To further enhance the machinability of this material, a novel hybrid machining technique called ultrasonically assisted turning (UAT) was used. Experimental investigations were carried out to study the machinability, chip shapes, cutting forces, temperature in the process zone and surface roughness for conventional and ultrasonically assisted turning of both alloys. UAT shows improved machinability with reduced nominal cutting forces, improved surface roughness of the machined workpiece and generation of shorter chips when compared to conventional machining conditions.
Description: This is the author’s version of a work that was accepted for publication in the Journal of Materials Processing Technology. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published at: http://dx.doi.org/10.1016/j.jmatprotec.2013.12.002
Version: Accepted for publication
DOI: 10.1016/j.jmatprotec.2013.12.002
URI: https://dspace.lboro.ac.uk/2134/14039
Publisher Link: http://dx.doi.org/10.1016/j.jmatprotec.2013.12.002
Appears in Collections:Published Articles (Mechanical, Electrical and Manufacturing Engineering)

Files associated with this item:

File Description SizeFormat
JMPT- FreeMachining ARoy.pdfAccepted version3.27 MBAdobe PDFView/Open


SFX Query

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.