+44 (0)1509 263171
Please use this identifier to cite or link to this item:
|Title: ||Effect of ultrasonically-assisted drilling on carbon-fibre-reinforced plastics|
|Authors: ||Makhdum, Farrukh|
Phadnis, Vaibhav A.
Silberschmidt, Vadim V.
|Issue Date: ||2014|
|Publisher: ||© Elsevier|
|Citation: ||MAKHDUM, F. ... et al, 2014. Effect of ultrasonically-assisted drilling on carbon-fibre-reinforced plastics. Journal of Sound and Vibration, 333 (23), pp. 5939 - 5952|
|Abstract: ||This research focuses on the effect of ultrasonically-assisted drilling (UAD) on carbon fibre-reinforced plastics. High-frequency vibration was used to excite a drill bit during its standard operation. An extensive experimental study of drilling forces, temperature, chip formation, surface finish, circularity, delamination and tool wear was conducted using ∅3 mm drill and presented here. UAD showed a significant improvement in drill quality when compared to conventional drilling processes. A finite-element study was also conducted to understand the nature of drilling-force reduction in UAD.|
|Description: ||NOTICE: this is the author’s version of a work that was accepted for publication in
Journal of Sound and Vibration. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in
Journal of Sound and Vibration, Volume 333, Issue 23, 24 November 2014, Pages 5939–5952
|Version: ||Accepted for publication|
|Publisher Link: ||http://dx.doi.org/10.1016/j.jsv.2014.05.042|
|Appears in Collections:||Published Articles (Mechanical, Electrical and Manufacturing Engineering)|
Files associated with this item:
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.