Loughborough University
Leicestershire, UK
LE11 3TU
+44 (0)1509 263171
Loughborough University

Loughborough University Institutional Repository

Please use this identifier to cite or link to this item: https://dspace.lboro.ac.uk/2134/20197

Title: Design and performance of a flexible metal mountable UHF RFID tag
Authors: Kaur, Navjot
Segura-Velandia, Diana M.
Whittow, W.G.
Barwick, David
Iredia, Ehidiamen
Parker, Neil
Porter, Neil
Conway, Paul P.
West, Andrew A.
Issue Date: 2015
Publisher: © IEEE
Citation: KAUR, N. ...et al., 2015. Design and performance of a flexible metal mountable UHF RFID tag. Presented at the IEEE 65th Electronic Components and Technology Conference (ECTC), San Diego, (CA), 26-29 May, pp. 2120-2126.
Abstract: The large number of requirements and opportunities for automatic identification in manufacturing domains such as automotive and electronics has accelerated the demand for item-level tracking using Radio Frequency IDentification technology (RFID). End-users are interested in solutions that enable a range of objects to be identified without changing the structure of the objects. Designing an RFID tag, which can be mounted successfully on metallic objects and meets the end-user requirement is a major research challenge. The aim of the research outlined in this paper is to determine the effects of the harsh manufacturing environments in which RFID tags are used and compare the performance of a range of RFID tag substrates that can be used to isolate the RFID tag antenna from metallic objects. The goal is to determine which substrates allow RFID tags to operate efficiently when attached to metallic, lossy or dielectric objects whilst being low cost, high performance, flexible and in some cases reusable solutions. A flexible RFID tag with a substrate consisting of an elastomer / polymer has been investigated as a part of this research. Additionally, paper and PET substrates integrated with a number of different conductive inks, have also been investigated as potential optimal solutions for the high volume manufacture of UHF RFID tags suitable for metal objects. The research details the design and evaluation of performance of number of RFID tags when applied to tracking of automotive assets and components such as stillages throughout their manufacturing, assembly and the supply chain.
Description: © 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
Sponsor: The TSB Grant award TP No. 14218-87248 supported this work financially.
Version: Accepted
DOI: 10.1109/ECTC.2015.7159895
URI: https://dspace.lboro.ac.uk/2134/20197
Publisher Link: http://dx.doi.org/10.1109/ECTC.2015.7159895
ISBN: 9781479986095
ISSN: 0569-5503
Appears in Collections:Conference Papers and Contributions (Mechanical, Electrical and Manufacturing Engineering)

Files associated with this item:

File Description SizeFormat
ECTC_20150301 cz.pdfAccepted1.49 MBAdobe PDFView/Open

 

SFX Query

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.