+44 (0)1509 263171
Please use this identifier to cite or link to this item:
|Title: ||Efficiency and durability predictions of high performance racing transmissions|
|Authors: ||Fatourehchi, Ehsan|
|Issue Date: ||2016|
|Publisher: ||© SAE International|
|Citation: ||FATOUREHCHI, E. ...et al., 2016. Efficiency and durability predictions of high performance racing transmissions. SAE International Journal of Passenger Cars - Mechanical Systems, 9 (3), pp. 1117-1124.|
|Abstract: ||Efficiency and durability are key areas of research and development in modern racing drivetrains. Stringent regulations necessitate the need for components capable of operating under highly loaded conditions whilst being efficient and reliable. Downsizing, increasing the power- to-weight ratio and modification of gear teeth geometry to reduce friction are some of the actions undertaken to achieve these objectives. These approaches can however result in reduced structural integrity and component durability. Achieving a balance between system reliability and optimal efficiency requires detailed integrated multi-disciplinary analyses, with the consideration of system dynamics, contact mechanics/tribology and stress analysis/structural integrity.
This paper presents an analytical model to predict quasi-static contact power losses in lubricated spur gear sets operating under the Elastohydrodynamic regime of lubrication. Tooth Contact Analysis (TCA) is used to predict variations in contact loads, local surface curvature and rolling and sliding velocities. This is combined with an extrapolated oil film thickness formula available in literature, to predict instantaneous lubricant film thickness and sub-surface stresses. Subsequently, viscous and boundary friction are estimated, enabling calculation of power losses.
The presented methodology has been used to investigate the effects of parabolic tip relief on power loss and induced sub-surface stresses. The results of this investigation are also presented.|
|Description: ||This paper is embargoed until December 2016.|
|Version: ||Accepted for publication|
|Publisher Link: ||http://dx.doi.org/10.4271/2016-01-1852|
|Appears in Collections:||Closed Access (Mechanical, Electrical and Manufacturing Engineering)|
Files associated with this item:
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.