Loughborough University
Leicestershire, UK
LE11 3TU
+44 (0)1509 263171
Loughborough University

Loughborough University Institutional Repository

Please use this identifier to cite or link to this item: https://dspace.lboro.ac.uk/2134/22306

Title: Uncertainty estimation of temperature coefficient measurements of PV modules
Authors: Mihaylov, Blagovest V.
Betts, Thomas R.
Pozza, A.
Mullejans, Harald
Gottschalg, Ralph
Keywords: Photovoltaic (PV)
Module
Temperature coefficient
Measurement
Uncertainty
Issue Date: 2016
Publisher: Institute of Electrical and Electronics Engineers (IEEE) © the authors
Citation: MIHAYLOV, B.V. ...et al., 2016. Uncertainty estimation of temperature coefficient measurements of PV modules. IEEE Journal of Photovoltaics, 6(6), pp. 1554-1563.
Abstract: Temperature coefficients of PV modules play an important role in distinguishing between products in an increasingly competitive market. However, measurement setups vary greatly and inter-laboratory comparisons show deviations from the mean of around ±10-15 %, or even larger, for temperature coefficients of maximum power. Measurement deviations often do not agree with the uncertainty estimates indicating that uncertainty is significantly underestimated. On the other hand, some laboratories have adopted a very conservative approach and needlessly overestimate the uncertainty. A new and robust methodology for calculating the temperature coefficients is presented here. This includes estimating and propagating the uncertainty of different types of measurement systems and procedures, in accordance with international standards. The method is validated with a round-robin inter-comparison. Two c Si modules were measured with five different measurement setups with uncertainties estimated following the proposed approach. The advanced uncertainty estimation method resulted in a decrease of the estimated uncertainty of all systems by a minimum of 50 % compared to the previous conservative estimates, enabling us to identify a previously unknown systematic effect. The measurement results of one of the systems were inconsistent with the estimated uncertainty. Further investigation confirmed a systematic effect due to the poor spectrum of that system. Removing the outlier measurement, the measurement percentage deviation from the reference value for maximum power temperature coefficients was within ±3.2%. The deviation was consistent with the stated uncertainties. The approach can facilitate the reduction of temperature coefficient measurements uncertainty by highlighting areas of improvement for bespoke systems.
Description: This paper is an open access article published by IEEE and distributed under the terms of the Creative Commons Attribution Licence 3.0 (CC BY 3.0), https://creativecommons.org/licenses/by/3.0/
Sponsor: This work was conducted as part of research projects “Stability and Performance of Photovoltaics” and “SUPERSOLAR Solar Energy Hub,” which are funded by the Research Councils UK’s Energy Program under Contract EP/H040331/1 and Contract EP/J017361/1.
Version: Published
DOI: 10.1109/JPHOTOV.2016.2598259
URI: https://dspace.lboro.ac.uk/2134/22306
Publisher Link: http://dx.doi.org/10.1109/JPHOTOV.2016.2598259
ISSN: 2156-3381
Appears in Collections:Published Articles (Mechanical, Electrical and Manufacturing Engineering)

Files associated with this item:

File Description SizeFormat
07556403.pdfPublished version702.7 kBAdobe PDFView/Open

 

SFX Query

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.