+44 (0)1509 263171
Please use this identifier to cite or link to this item:
|Title: ||Finite element modeling and experimentation of bone drilling forces|
|Authors: ||Lughmani, Waqas A.|
Ashcroft, Ian A.
|Keywords: ||Finite element analysis|
|Issue Date: ||2013|
|Publisher: ||IOP (© the authors)|
|Citation: ||LUGHMANI, W., BOUAZZA-MAROUF, K. and ASHCROFT, I., 2013. Finite element modeling and experimentation of bone drilling forces. Journal of Physics: Conference Series, 451, DOI: 10.1088/1742-6596/451/1/012034.|
|Abstract: ||Bone drilling is an essential part of many orthopaedic surgery procedures, including those for internal fixation and for attaching prosthetics. Estimation and control of bone drilling forces are critical to prevent drill breakthrough, excessive heat generation, and mechanical damage to the bone. This paper presents a 3D finite element (FE) model for prediction of thrust forces experienced during bone drilling. The model incorporates the dynamic characteristics involved in the process along with the accurate geometrical considerations. The average critical thrust forces and torques obtained using FE analysis, for set of machining parameters are found to be in good agreement with the experimental results.|
|Description: ||This article was published as Open Access by IOP Publishing. Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s)and the title of the work, journal citation and DOI.|
|Publisher Link: ||http://dx.doi.org/10.1088/1742-6596/451/1/012034|
|Appears in Collections:||Published Articles (Mechanical, Electrical and Manufacturing Engineering)|
Files associated with this item:
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.