+44 (0)1509 263171
Please use this identifier to cite or link to this item:
|Title: ||Noncontact blood perfusion mapping in clinical applications|
|Authors: ||Iakovlev, Dmitry|
Dwyer, Vincent M.
Silberschmidt, Vadim V.
|Issue Date: ||2016|
|Publisher: ||© SPIE|
|Citation: ||IAKOVLEV, D. ... et al, 2016. Noncontact blood perfusion mapping in clinical applications. IN: Popp, J. ... et al (eds). Biophotonics: Photonic Solutions for Better Health Care V, 988712 (April 27, 2016), Proceedings of SPIE, 9887, doi:10.1117/12.2225216|
|Abstract: ||© 2016 SPIE.Non-contact imaging photoplethysmography (iPPG) to detect pulsatile blood microcirculation in tissue has been selected as a successor to low spatial resolution and slow scanning blood perfusion techniques currently employed by clinicians. The proposed iPPG system employs a novel illumination source constructed of multiple high power LEDs with narrow spectral emission, which are temporally modulated and synchronised with a high performance sCMOS sensor. To ensure spectrum stability and prevent thermal wavelength drift due to junction temperature variations, each LED features a custom-designed thermal management system to effectively dissipate generated heat and auto-adjust current flow. The use of a multi-wavelength approach has resulted in simultaneous microvascular perfusion monitoring at various tissue depths, which is an added benefit for specific clinical applications. A synchronous detection algorithm to extract weak photoplethysmographic pulse-waveforms demonstrated robustness and high efficiency when applied to even small regions of 5 mm2. The experimental results showed evidences that the proposed system could achieve noticeable accuracy in blood perfusion monitoring by creating complex amplitude and phase maps for the tissue under examination.|
|Description: ||Copyright © 2016 SPIE. Society of Photo Optical Instrumentation Engineers. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited.|
|Publisher Link: ||http://dx.doi.org/10.1117/12.2225216|
|Appears in Collections:||Published Articles (Mechanical, Electrical and Manufacturing Engineering)|
Files associated with this item:
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.