+44 (0)1509 263171
Please use this identifier to cite or link to this item:
|Title: ||Accurate characterisation of hole geometries by fringe projection profilometry|
|Authors: ||Wu, Yuxiang|
Dantanarayana, Harshana G.
Huntley, Jonathan M.
|Keywords: ||Fringe projection|
Hole diameter estimation
|Issue Date: ||2017|
|Publisher: ||© SPIE|
|Citation: ||WU, Y. ...et al., 2017. Accurate characterisation of hole geometries by fringe projection profilometry. Proc. SPIE 10332, Videometrics, Range Imaging, and Applications XIV, 1033204 (June 26, 2017); doi:10.1117/12.2270210.|
|Series/Report no.: ||Proceedings of SPIE;10332|
|Abstract: ||Accurate localisation and characterisation of holes is often required in the field of automated assembly and quality control. Compared to time consuming coordinate measuring machines (CMM), fringe-projection-based 3D scanners offer an attractive alternative as a fast, non-contact measurement technique that provides a dense 3D point cloud of a large sample in a few seconds. However, as we show in this paper, measurement artefacts occur at such hole edges, which can introduce errors in the estimated hole diameter by well over 0.25 mm, even though the estimated hole centre
locations are largely unaffected. A compensation technique to suppress these measurement artefacts has been developed,
by modelling the artefact using data extrapolated from neighboring pixels. By further incorporating a sub-pixel edge
detection technique, we have been able to reduce the root mean square (RMS) diameter errors by up to 9.3 times using the proposed combined method.|
|Description: ||Copyright 2017 Society of Photo-Optical Instrumentation Engineers. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited.|
|Sponsor: ||This work was supported by the Engineering and Physical Sciences Research Council under the Light Controlled Factory project EP/K018124/1.|
|Publisher Link: ||http://dx.doi.org/10.1117/12.2270210|
|Appears in Collections:||Conference Papers and Presentations (Mechanical, Electrical and Manufacturing Engineering)|
Files associated with this item:
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.