+44 (0)1509 263171
Please use this identifier to cite or link to this item:
|Title: ||SAR levels for irradiation by a crumpled 900 MHz flexible diamond dipole|
|Authors: ||Elias, Norfatin Akma|
Samsuri, Noor A.
Rahim, Mohamad Kamal A.
|Issue Date: ||2017|
|Publisher: ||© Institute of Advanced Engineering and Science|
|Citation: ||ELIAS, N.A. ...et al., 2017. SAR levels for irradiation by a crumpled 900 MHz flexible diamond dipole. International Journal of Electrical and Computer Engineering, 7(3), pp. 1546-1553.|
|Abstract: ||In this work, the antenna performance and Specific Absorption Rate (SAR) levels in a homogeneous phantom exposed to 900 MHz flexible diamond dipole antenna are investigated under different crumpling deformation conditions. The numerical simulations of the realistic complex two dimensional crumpling are performed by using Finite Integration Technique (FIT) which is applied in Computer Simulation Technology (CST) Microwave Studio. The validation of results with the industry standard DASY4 robot SAR measurement system is made possible with the use of homogenous phantom model. The 1 g, 10 g and point SAR are enhanced by 28.33 %, 36.75 % and 9.55 % respectively due to the antenna crumpling deformation. The short length ripple investigated in this paper shows the highest relative SAR increment.|
|Description: ||This is an Open Access Article. It is published by Institute of Advanced Engineering and Science under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY-NC-ND). Full details of this licence are available at: http://creativecommons.org/licenses/by-nc-nd/4.0/|
|Sponsor: ||This work was supported by the Ministry of Education Malaysia (MOE), Research Management Centre (RMC), School of Postgraduate (SPS), Universiti Teknologi Malaysia (UTM), Research grant 4F883, 4L811 and Universiti Teknikal Malaysia Melaka (UTeM).|
|Publisher Link: ||https://doi.org/10.11591/ijece.v7i3.pp1546-1553|
|Appears in Collections:||Published Articles (Mechanical, Electrical and Manufacturing Engineering)|
Files associated with this item:
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.