+44 (0)1509 263171
Please use this identifier to cite or link to this item:
|Title: ||Numerical modelling of effects of biphasic layers of corrosion products to the degradation of magnesium metal in vitro|
|Authors: ||Ahmed, Safia K.|
Ward, John P.
|Issue Date: ||2017|
|Publisher: ||© The Authors. Published by MDPI.|
|Citation: ||AHMED, S.K., WARD, J.P. and LIU, Y., 2017. Numerical modelling of effects of biphasic layers of corrosion products to the degradation of magnesium metal in vitro. Materials, 11(1): 1.|
|Abstract: ||© 2017 by the authors. Magnesium (Mg) is becoming increasingly popular for orthopaedic implant materials. Its mechanical properties are closer to bone than other implant materials, allowing for more natural healing under stresses experienced during recovery. Being biodegradable, it also eliminates the requirement of further surgery to remove the hardware. However, Mg rapidly corrodes in clinically relevant aqueous environments, compromising its use. This problem can be addressed by alloying the Mg, but challenges remain at optimising the properties of the material for clinical use. In this paper, we present a mathematical model to provide a systematic means of quantitatively predicting Mg corrosion in aqueous environments, providing a means of informing standardisation of in vitro investigation of Mg alloy corrosion to determine implant design parameters. The model describes corrosion through reactions with water, to produce magnesium hydroxide Mg(OH) 2 , and subsequently with carbon dioxide to form magnesium carbonate MgCO 3 . The corrosion products produce distinct protective layers around the magnesium block that are modelled as porous media. The resulting model of advection-diffusion equations with multiple moving boundaries was solved numerically using asymptotic expansions to deal with singular cases. The model has few free parameters, and it is shown that these can be tuned to predict a full range of corrosion rates, reflecting differences between pure magnesium or magnesium alloys. Data from practicable in vitro experiments can be used to calibrate the model's free parameters, from which model simulations using in vivo relevant geometries provide a cheap first step in optimising Mg-based implant materials.|
|Description: ||This is an Open Access Article. It is published by MDPI under the Creative Commons Attribution 4.0 Unported Licence (CC BY). Full details of this licence are available at: http://creativecommons.org/licenses/by/4.0/|
|Publisher Link: ||https://doi.org/10.3390/ma11010001|
|Appears in Collections:||Published Articles (Maths)|
Published Articles (Mechanical, Electrical and Manufacturing Engineering)
Files associated with this item:
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.