Loughborough University
Leicestershire, UK
LE11 3TU
+44 (0)1509 263171
Loughborough University

Loughborough University Institutional Repository

Please use this identifier to cite or link to this item: https://dspace.lboro.ac.uk/2134/28427

Title: Compact latent heat storage decarbonization potential for domestic hot water and space heating applications in the UK
Authors: Pereira da Cunha, Jose
Eames, Philip C.
Keywords: Phase change materials
Latent heat thermal storage
Domestic hot water
Domestic space heating
Air source heat pumps
Finite volume enthalpy models
Issue Date: 2018
Publisher: Elsevier
Citation: PEREIRA DA CUNHA, J. and EAMES, P.C., 2018. Compact latent heat storage decarbonization potential for domestic hot water and space heating applications in the UK. Applied Thermal Engineering, doi:10.1016/j.applthermaleng.2018.01.120.
Abstract: A performance comparison is presented for a domestic space and hot water heating system with a conventional gas boiler and an air source heat pump (ASHP) with latent heat storage, both with solar thermal collectors for a typical UK climate, to demonstrate the potential of phase change material based energy storage in active heating applications. The latent heat thermal storage system consisted of 10 modules with RT54HC comprising a total storage capacity of 14.75kWh that provided 53% extra thermal storage capacity over the temperature range of 40 to 65°C compared to a water only store. The simulations predicted a potential yearly CO2 reduction of 56%, and a yearly energy reduction of 76% when operating the heat pumps using the economy 10 electricity tariff i.e a low tariff between 00.00-05.00 and 13.00-16.00 with current grid emission values compared to the conventional gas boiler system; successfully offsetting the electrical load to meet the required heat demand. Due to the high capital costs of the heat pump system with latent heat storage, its levelized cost of energy was 117.84£/MWh, compared to 69.66£/MWh for the gas boiler, on a 20-year life cycle.
Description: This is an Open Access Article. It is published by Elsevier under the Creative Commons Attribution 4.0 International Licence (CC BY). Full details of this licence are available at: http://creativecommons.org/licenses/by/4.0/. The accepted version will be replaced by the published version once this is available.
Sponsor: The research presented in this paper is funded by the EPSRC through Grant reference EP/K011847/1, the Interdisciplinary centre for Storage, Transformation and Upgrading of Thermal Energy (i-STUTE) and a Loughborough University funded PhD studentship.
Version: Accepted for publication
DOI: 10.1016/j.applthermaleng.2018.01.120
URI: https://dspace.lboro.ac.uk/2134/28427
Publisher Link: https://doi.org/10.1016/j.applthermaleng.2018.01.120
ISSN: 1359-4311
Appears in Collections:Published Articles (Mechanical, Electrical and Manufacturing Engineering)

Files associated with this item:

File Description SizeFormat
1-s2.0-S135943111733586X-main.pdfAccepted version2 MBAdobe PDFView/Open


SFX Query

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.