Loughborough University
Browse
Thesis-1995-Idris.pdf (4.3 MB)

The processing and evaluation of an investment-cast magnesium–base alloy

Download (4.3 MB)
thesis
posted on 2018-05-25, 14:23 authored by Mohd H.H. Idris
Magnesium alloys are well known for their high affinity for oxygen and highly reactive characteristics. This has created difficulties in their processing. During melting, a protective film generated by chloride or fluoride based flux or an inert atmosphere created by a specific gas combination, is required to isolate the melt from the atmosphere in order to suppress any reaction. At the casting stage, reaction with some mould materials is likely to happen. This has caused a serious problem in the casting of magnesium, particularly with the investment casting process. The mould-metal interface reaction must be eliminated or minimized if the production of castings with close tolerances and good surface finish is to be achieved. [Continues.]

Funding

Malysia, Government. Universiti Teknologi Malaysia. Institute of British Foundrymen.

History

School

  • Mechanical, Electrical and Manufacturing Engineering

Publisher

© Mohd Hasbullah Hj. Idris

Publisher statement

This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/

Publication date

1995

Notes

A Master's Thesis. Submitted in partial fulfilment of the requirements for the award of Master of Philosophy at Loughborough University.

Language

  • en

Administrator link

Usage metrics

    Mechanical, Electrical and Manufacturing Engineering Theses

    Categories

    Keywords

    untaggedMechanical Engineering not elsewhere classified

    Licence

    CC BY-NC-ND 4.0

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC