2018 Optimization of the CZTSe thin film composition obtained by a sequential electrodeposition process_CZTSe_RK_SurEng_20052018_resimsiz_edited clean (2).pdf (202.61 kB)
Optimisation of the CZTSe thin film composition obtained by a sequential electrodeposition process
journal contribution
posted on 2018-07-24, 12:20 authored by Ramazan Katirci, Michael WallsMichael WallsThe influence of the elemental composition of CuZnSn coatings deposited by electrodeposition on the formation of the Cu2ZnSnSe4 crystal structure following a selenisation process was investigated using X-ray diffraction, scanning electron microscopy and Raman spectroscopy. This study showed that the optimum alloy ratio to achieve the Cu2ZnSnSe4 crystal without impurity phases was in the range of 0.37–0.50 for Cu/(Zn+Sn) and 2.5–4 for Zn/Sn.
Funding
This work was supported by the Turkiye Bilimsel ve Teknolojik Arastirma Kurumu [grant number 1059B191400996 (2219 program)].
History
School
- Mechanical, Electrical and Manufacturing Engineering
Published in
Surface EngineeringVolume
35Issue
10Pages
854 - 860Citation
KATIRCI, R. and WALLS, M., 2018. Optimisation of the CZTSe thin film composition obtained by a sequential electrodeposition process. Surface Engineering, 35 (10), pp.854-860.Publisher
Taylor & Francis on behalf of the Institute of Materials, Minerals and MiningVersion
- AM (Accepted Manuscript)
Rights holder
© Institute of Materials, Minerals and MiningPublisher statement
This is an Accepted Manuscript of an article published by Taylor & Francis in Surface Engineering on 12 July 2018, available online: http://www.tandfonline.com/10.1080/02670844.2018.1495415.Acceptance date
2018-06-14Publication date
2018-07-12Copyright date
2018ISSN
0267-0844eISSN
1743-2944Language
- en
