Loughborough University
Browse
Morino_et_al-2018-Earth_Surface_Processes_and_Landforms.pdf (3.97 MB)

Debris-flow release processes investigated through the analysis of multi-temporal LiDAR datasets in north-western Iceland

Download (3.97 MB)
journal contribution
posted on 2018-08-16, 09:57 authored by Costanza Morino, Susan J. Conway, Matthew Balme, John HillierJohn Hillier, Colm J. Jordan, Thorsteinn Saemundsson, Tom Argles
Debris flows are fast-moving gravity flows of poorly sorted rock and soil, mixed and saturated with water. Debris-flow initiation has been studied using empirical and experimental modelling, but the geomorphic changes, indicative of different triggering processes, are difficult to constrain with field observations only. We identify signatures to distinguish two different debris-flow release styles by integrating high-resolution multi temporal remote sensing datasets and morphometric analysis. We analyse debris flows sourced above the town of Ísafjörður (Iceland). Two debris-flow triggering processes were previously hypothesized for this site: (i) slope failure, characterised by landslides evolving into debris flows, and (ii) the fire-hose effect, in which debris accumulated in pre-existing, steep-sided bedrock passages is transported by a surge of water. It is unknown which process dominates and determines the local risk. To investigate this question, we compare airborne LiDAR elevation models and aerial photographs collected in 2007 with similar data from 2013. We find that two new debris-flow tracks were created by slope failures. These are characterised by steep sliding surfaces and lateral leveed channels. Slope failure also occurred in two large, recently active tracks, creating the preparatory conditions for the fire-hose effect to mobilise existing debris. These tracks show alternating zones of fill and scour along their length, and debris stored below the source-area at rest angles >35°. Our approach allows us to identify and quantify the morphological changes produced by slope failure release process, which generated the preparatory conditions for the fire-hose effect. As debris flows are rarely observed in action and morphological changes induced by them are difficult to detect and monitor, the same approach could be applied to other landscapes to understand debris-flow initiation in absence of other monitoring information, and can improve the identification of zones at risk in inhabited areas near hillslopes with potential for debris flows.

History

School

  • Social Sciences

Department

  • Geography and Environment

Published in

Earth Surface Processes and Landforms

Citation

MORINO, C. ... et al., 2018. Debris-flow release processes investigated through the analysis of multi-temporal LiDAR datasets in north-western Iceland. Earth Surface Processes and Landforms, 44 (1), pp.144-159.

Publisher

John Wiley & Sons Ltd (© the authors)

Version

  • VoR (Version of Record)

Publisher statement

This work is made available according to the conditions of the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by/4.0/

Acceptance date

2018-08-12

Publication date

2018

Notes

This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.

ISSN

0197-9337

Language

  • en

Usage metrics

    Loughborough Publications

    Licence

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC