Loughborough University
Leicestershire, UK
LE11 3TU
+44 (0)1509 263171
Loughborough University

Loughborough University Institutional Repository

Please use this identifier to cite or link to this item: https://dspace.lboro.ac.uk/2134/36469

Title: Design of lamella separators. Part 2
Authors: Brown, Deborah J.
Issue Date: 1986
Publisher: © D.J. Brown
Abstract: A method has been developed to predict the minimum angle at which solids will flow down the lower inclined surface of a lamella separator. It is based on a frictional analysis and requires experimental data from a simple batch rig. This method should help to eliminate problems with sludge build-up in lamella separators. The minimum angle was dependent on particle size, shape and surface texture, liquid viscosity and surface tension and the type of settler material. The degree of variation in the underflow solids concentration with time was also examined. It was found to be dependent on settler length, angle and a well-established flow regime. The mode of sludge flow and the mode of settler operation had no effect. [Continues.]
Description: A Doctoral Thesis. Submitted in partial fulfilment of the requirements for the award of the degree of Doctor of Philosophy at Loughborough University.
See also: P.H. POH. 'Development of design methods for lamella separators.' (Ph.D. thesis, Loughborough University.) Loughborough : Loughborough University, 1984.
Sponsor: Loughborough University.
URI: https://dspace.lboro.ac.uk/2134/36469
Appears in Collections:PhD Theses (Chemical Engineering)

Files associated with this item:

File Description SizeFormat
Thesis-1986-Brown.pdf5.86 MBAdobe PDFView/Open
Form-1986-Brown.pdf30.12 kBAdobe PDFView/Open

 

SFX Query

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.