Loughborough University
Browse
Woodget_etal_ESPL_Revision3_June2014.pdf (4.03 MB)

Quantifying submerged fluvial topography using hyperspatial resolution UAS imagery and structure from motion photogrammetry

Download (4.03 MB)
journal contribution
posted on 2019-06-17, 13:04 authored by Amy Woodget, Patrice Carbonneau, F. Visser, Ian P. Maddock
Quantifying the topography of rivers and their associated bedforms has been a fundamental concern of fluvial geomorphology for decades. Such data, acquired at high temporal and spatial resolutions, are increasingly in demand for process oriented investigations of flow hydraulics, sediment dynamics and in-stream habitat. In these riverine environments, the most challenging region for topographic measurement is the wetted, submerged channel. Generally, dry bed topography and submerged bathymetry are measured using different methods and technology. This adds to the costs, logistical challenges and data processing requirements of comprehensive river surveys. However, some technologies are capable of measuring the submerged topography. Through-water photogrammetry and bathymetric LiDAR are capable of reasonably accurate measurements of channel beds in clear water. Whilst the cost of bathymetric LiDAR remains high and its resolution relatively coarse, the recent developments in photogrammetry using Structure from Motion (SfM) algorithms promise a fundamental shift in the accessibility of topographic data for a wide range of settings. Here we present results demonstrating the potential of so called SfM-photogrammetry for quantifying both exposed and submerged fluvial topography at the mesohabitat scale. We show that imagery acquired from a rotary-winged Unmanned Aerial System (UAS) can be processed in order to produce digital elevation models (DEMs) with hyperspatial resolutions (c. 0.02m) for two different river systems over channel lengths of 50- 100m. Errors in submerged areas range from 0.016m to 0.089m, which can be reduced to between 0.008m and 0.053m with the application of a simple refraction correction. This work therefore demonstrates the potential of UAS platforms and SfM-photogrammetry as a single technique for surveying fluvial topography at the mesoscale (defined as lengths of channel from c.10m to a few hundred metres).

Funding

This work was carried out as part of a University of Worcester funded PhD studentship. We thank the British Society for Geomorphology and the Geological Remote Sensing Group for providing postgraduate funding awards to Amy Woodget and Bath Spa University for additional financial support.

History

Department

  • Geography and Environment

Published in

Earth Surface Processes and Landforms

Volume

40

Issue

1

Pages

47 - 64

Citation

WOODGET, A. ... et al., 2015. Quantifying submerged fluvial topography using hyperspatial resolution UAS imagery and structure from motion photogrammetry. Earth Surface Processes and Landforms, 40(1), pp. 47 - 64.

Publisher

© Wiley

Version

  • AM (Accepted Manuscript)

Publisher statement

This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/

Acceptance date

2014-06-09

Publication date

2014-08-05

Notes

This is the peer reviewed version of the following article: WOODGET, A. ... et al., 2015. Quantifying submerged fluvial topography using hyperspatial resolution UAS imagery and structure from motion photogrammetry. Earth Surface Processes and Landforms, 40(1), pp. 47 - 64, which has been published in final form at https://doi.org/10.1002/esp.3613. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions.

ISSN

0197-9337

Language

  • en