Loughborough University
Leicestershire, UK
LE11 3TU
+44 (0)1509 263171
Loughborough University

Loughborough University Institutional Repository

Please use this identifier to cite or link to this item: https://dspace.lboro.ac.uk/2134/3896

Title: Predicting the flexural load–deflection response of steel fibre reinforced concrete from strain, crack-width, fibre pull-out and distribution data
Authors: Jones, Peter A.
Austin, Simon A.
Robins, Peter J.
Keywords: Steel fibre
Pull out
Flexure
Composite
Toughness
Concrete
Issue Date: 2008
Publisher: Springer Netherlands
Citation: JONES, P.A., AUSTIN, S.A. and ROBINS, P.J., 2008. Predicting the flexural load–deflection response of steel fibre reinforced concrete from strain, crack-width, fibre pull-out and distribution data. Materials and Structures, 41 (3), pp. 449-463.
Abstract: A semi-analytical model is presented, based on conventional principles of mechanics, to predict the flexure behaviour of steel fibre reinforced concrete. The model uses a stress-block approach to represent the stresses that develop at a cracked section by three discrete stress zones: (a) a compressive zone; (b) an uncracked tensile zone; and (c) a cracked tensile zone. It is further shown that the stress-block, and hence flexural behaviour, is a function of five principal parameters: compressive stress–strain relation; tensile stress–strain relation; fibre pull-out behaviour; the number and distribution of fibres across the cracked section in terms of their positions, orientations and embedment lengths; and the strain/crack-width profile in relation to the deflection of the beam. An experimental investigation was undertaken on both cast and sprayed specimens to obtain relationships for use in the model. The results of the study showed a reasonable agreement between the model predictions and experimental results. However, the accuracy of the model is probably unacceptable for it to be currently used in design. A subsequent analysis highlighted the single fibre pull-out test and the sensitivity of the strain analysis tests as being the main cause of the discrepancies.
Description: This article was accepted for publication in the journal, Materials and Structures [© RILEM]. The original publication is available at the publisher’s web site: http://www.springerlink.com/content/119994/ Please contact RILEM for permission to reprint or use the material in any form (http://www.rilem.net/contactUs.php)
DOI: 10.1617/s11527-007-9327-9
URI: https://dspace.lboro.ac.uk/2134/3896
Publisher Link: http://dx.doi.org/10.1617/s11527-007-9327-9
ISSN: 1359-5997
1871-6873
Appears in Collections:Published Articles (Civil and Building Engineering)

Files associated with this item:

File Description SizeFormat
Predictin the flexural load-deflection response _2_.pdf601.21 kBAdobe PDFView/Open

 

SFX Query

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.