Loughborough University
Leicestershire, UK
LE11 3TU
+44 (0)1509 263171
Loughborough University

Loughborough University Institutional Repository

Please use this identifier to cite or link to this item: https://dspace.lboro.ac.uk/2134/4184

Title: Novel rework techniques for electronic assemblies
Authors: Stennett, A.D.
Whalley, David C.
Issue Date: 1998
Publisher: © IEEE
Citation: STENNETT, A.D. and WHALLEY, D.C., 1998. Novel rework techniques for electronic assemblies. IN: Proceedings of the IEEE 2nd Electronics Packaging Technology Conference, Singapore, 8-10th December 1998, pp. 196-201
Abstract: Soft soldering is the primary joining technology used in electronics assembly and is expected to remain so for the foreseeable future. Component removal for rework and repair is traditionally achieved by remelting of the solder, but the exposure of the assembly or its component parts to repeated soldering/desoldering cycles may cause both immediate damage and create a significant long term reliability hazard. Rework is also currently labour intensive and requires skilled operators. Area array components, such as ball grid arrays (BGAs), further increase rework process complexity due to the number and inaccessibility of the solder joints and, for some devices, the necessity to remove and replace the solder balls before component replacement. There is also a growing requirement to recycle/reclaim electronic waste, creating the need for an effective process for dismantling of printed circuit board assemblies (PCBAs). This paper presents a brief review of alternative nonthermal techniques for rework or dismantling of conventional soldered assemblies, including both chemical etchants and mechanical techniques. Results are then presented on trials of chemical etchants, where solder removal rates consistent with realistic times for component removal have been readily achieved using commercially available tin-lead strippers. Electrochemical techniques are also shown to be usable in specific applications, i.e. where electrical contact can be readily made to the solder joints to be removed and have the advantage of reclaiming the removed solder directly from the electrolyte
Description: This is a conference paper [© IEEE]. It is also available from: http://ieeexplore.ieee.org/xpl/RecentCon.jsp?punumber=6121. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Version: Published
DOI: 10.1109/EPTC.1998.756001
URI: https://dspace.lboro.ac.uk/2134/4184
ISBN: 078035141X
Appears in Collections:Conference Papers and Presentations (Mechanical, Electrical and Manufacturing Engineering)

Files associated with this item:

File Description SizeFormat
RC38.pdf955.88 kBAdobe PDFView/Open


SFX Query

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.