Statistical processing for telecommunication networks applied to ATM traffic monitoring

Within the fields of network operation and performance measurement, it is a common requirement that the technologies involved must provide the basis for an effective, reliable, measurable and controllable service. In order to comply with the service performance criteria, the constrains often lead to very complex techniques and methodologies for the simulation, control, test, and measurement processes. This thesis addresses some of the factors that contribute to the overall spectrum of statistical performance measurements in telecommunication services. Specifically, it is concerned with the development of three low complexity and effective techniques for real-time traffic generation, control and measurement. These techniques have proved to be accurate and near optimum. In the three cases the work starts with a literature survey of known methodologies, and later new techniques are proposed and investigated by simulating the processes involved. The work is based on the use of high-speed Asynchronous Transfer Mode (ATM) networks. The problem of developing a fast traffic generation technique for the simulation of Variable Bit Rate traffic sources is considered in the first part of this thesis. For this purpose, statistical measures are obtained from the analysis of different traffic profiles or from the literature. With the aid of these measures, a model for the fast generation of Variable Bit Rate traffic at different time resolutions is developed. The simulated traffic is then analysed in order to obtain the equivalent set of statistical measures and these are compared against those observed in real traffic traces. The subject of traffic control comprises a very wide area in communication networks. It refers to the generalised classification of actions such as Connection Admission and Flow Control, Traffic Policing and Shaping. In the second part of this thesis, a method to modify the instantaneous traffic profile of a variable rate source is developed. It is particularly useful for services which have a hard bound on the cell loss probability, but a soft bound on the admissible delay, matching the characteristics of some of the services provided by ATM networks. Finally, this thesis is also concerned with a particular aspect of the operation and management of high speed networks, or OAM functions plane, namely with the monitoring of network resources. A monitoring technique based on numerical approximation and statistical sampling methods is developed and later used to characterise a particular traffic stream, or a particular connection, within a high speed network. The resulting algorithms are simple and computationally inexpensive, but effective and accurate at the same time, and are suitable for real-time processing.