Loughborough University
Leicestershire, UK
LE11 3TU
+44 (0)1509 263171
Loughborough University

Loughborough University Institutional Repository

Please use this identifier to cite or link to this item: https://dspace.lboro.ac.uk/2134/8293

Title: Effect of cutting conditions on temperature generated in drilling process: a FEA approach
Authors: Muhammad, Riaz
Ahmed, N.
Shariff, Y.M.
Silberschmidt, Vadim V.
Keywords: Drilling
FEA
Temperature
Cutting conditions
Issue Date: 2011
Publisher: © Trans Tech Publications
Citation: MUHAMMAD, R. ... et al, 2011. Effect of cutting conditions on temperature generated in drilling process: A FEA approach. Advanced Materials Research, 223, pp. 240-246.
Abstract: Heat generated during a drilling process has a major influence on the tool life and the workpiece material behaviour that are significantly affected by cutting conditions (cutting speed, feed rate). In this paper, the effect of cutting conditions on temperature generated in drilling process is investigated by means of finite element (FE) simulations using commercially available code MSC MARC MENTAT. A Johnson Cook material model is used to describe elasto-plastic deformation behaviour. The updated Lagrangian procedure is used to implement the transient analysis for the elasto-plastic material in the model. A modified shear friction model is employed to model friction at the tool tip-workpiece interface. The effect of friction on chip shape is investigated with FE simulations. Experiments were carried out to verify the FE results.
Description: This article was accepted for publication in the journal, Advanced Materials Research [© Trans Tech Publications]. The definitive version is available at: http://dx.doi.org/10.4028/www.scientific.net/AMR.223.240
Version: Accepted for publication
DOI: 10.4028/www.scientific.net/AMR.223.240
URI: https://dspace.lboro.ac.uk/2134/8293
Publisher Link: http://dx.doi.org/10.4028/www.scientific.net/AMR.223.240
ISSN: 1022-6680
Appears in Collections:Published Articles (Mechanical and Manufacturing Engineering)

Files associated with this item:

File Description SizeFormat
CIRP drilling RM.pdf329.86 kBAdobe PDFView/Open

 

SFX Query

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.