Thesis-2012-Sadr.pdf (2.15 MB)
Supervisory model predictive control of building integrated renewable and low carbon energy systems
thesis
posted on 2012-03-23, 12:52 authored by Faramarz SadrTo reduce fossil fuel consumption and carbon emission in the building sector,
renewable and low carbon energy technologies are integrated in building energy
systems to supply all or part of the building energy demand. In this research, an
optimal supervisory controller is designed to optimize the operational cost and the
CO2 emission of the integrated energy systems. For this purpose, the building
energy system is defined and its boundary, components (subsystems), inputs and
outputs are identified. Then a mathematical model of the components is obtained.
For mathematical modelling of the energy system, a unified modelling method is
used. With this method, many different building energy systems can be modelled
uniformly. Two approaches are used; multi-period optimization and hybrid model
predictive control. In both approaches the optimization problem is deterministic, so
that at each time step the energy consumption of the building, and the available
renewable energy are perfectly predicted for the prediction horizon. The controller
is simulated in three different applications. In the first application the controller is
used for a system consisting of a micro-combined heat and power system with an
auxiliary boiler and a hot water storage tank. In this application the controller
reduces the operational cost and CO2 emission by 7.31 percent and 5.19 percent
respectively, with respect to the heat led operation. In the second application the
controller is used to control a farm electrification system consisting of PV panels, a
diesel generator and a battery bank. In this application the operational cost with
respect to the common load following strategy is reduced by 3.8 percent. In the
third application the controller is used to control a hybrid off-grid power system
consisting of PV panels, a battery bank, an electrolyzer, a hydrogen storage tank
and a fuel cell. In this application the controller maximizes the total stored energies
in the battery bank and the hydrogen storage tank.
History
School
- Architecture, Building and Civil Engineering
Publisher
© Faramarz SadrPublication date
2012Notes
A Doctoral Thesis. Submitted in partial fulfillment of the requirements for the award of Doctor of Philosophy of Loughborough University.Language
- en